Front Seat

REMOVAL




1. REMOVE FRONT SEAT OUTER BELT ANCHOR
a. Using a screwdriver, remove the seat belt anchor cover cap.

HINT: Tape the screwdriver tip before use.

b. Remove the front seat outer belt anchor.

Torque: 42 N.m (430 kgf.cm, 31 ft.lbf)

2. REMOVE SEAT TRACK COVER
Using a screwdriver, pry out the 4 covers.

HINT: Tape the screwdriver tip before use.

3. REMOVE FRONT SEAT
a. Remove the 4 bolts.

Torque: 37 N.m (375 kgf.cm, 27 ft.lbf)

b. Disconnect the connectors.

INSTALLATION
Installation is in the reverse order of removal.