Body
1. TIGHTEN BOLTS AND NUTS ON CHASSIS AND BODYTighten these parts;
- Front seat mounting bolts
Torque: 37 Nm (375 kg.cm, 27 ft.lb)
- Strut/stabilizer bar bracket-to-body mounting bolts
Torque: 72 Nm (730 kg.cm, 53 ft.lb)
- Front suspension lower crossmember-to-body mounting nuts
Torque: 98 Nm (1,000 kg.cm, 72 ft.lb)
- Rear suspension member-to-body mounting bolts
Torque: 180 Nm (1,840 kg.cm, 133 ft.lb)
2. BODY INSPECTION
a. Check the body exterior for dents, scratches and rust.
b. Check the underbody for rust and damage.If necessary, replace or repair.
3. REPLACE REFINER AIR FILTER.
4. ROAD TEST
a. Check the engine and chassis for abnormal noises.
b. Check that the vehicle does not wander or pull to one side.
c. Check that the brakes work properly and do not drag.
d. Do setting of the parking brake shoes and drum.
5. FINAL INSPECTION
a. Check the operation of the body parts:
- Hood:
- Auxiliary catch operates properly
- Hood locks securely when closed
- Front and rear doors:
- Door locks operate properly
- Doors close properly
- Luggage compartment door:
- Door lock operates properly
- Seats:
- Seat adjusts easily and locks securely in any position
- Front seat back locks securely in any position
b. Be sure to deliver a clean car. Especially check:
- Steering wheel
- Shift lever knob
- All switch knobs Seats