Fuel Cut RPM
FUEL CUT RPMINSPECTION
1. REMOVE V-BANK COVER
2. WARM UP ENGINE
Allow the engine to warm up to normal operating temperature.
3. CONNECT LEXUS HAND-HELD TESTER
a. Connect the LEXUS hand-held tester or OBD II scan tool to the DLC3.
b. Please refer to the LEXUS hand-held tester or OBD II scan tool operator's manual for further details.
4. INSPECT FUEL CUT OPERATION
a. Increase the engine speed to at least 2,500 rpm.
b. Use a sound scope to check for injector operating noise.
c. Check that when the throttle lever is released, injector operation noise stops momentarily and then resumes.
HINT:
- The vehicle should be stopped.
- Measure with the A/C OFF.
Fuel return rpm: 1,400 rpm
5. DISCONNECT LEXUS HAND-HELD TESTER
6. REINSTALL V-BANK COVER