Clearing Trouble Codes

NOTE: This is the only information provided by the manufacturer for Clearing Diagnostic Trouble Codes for this system.

Without LEXUS hand-held tester

Clear the DTC.




1. Using SST, connect the terminals Tc and CG of the DLC3.
SST 09843 - 18040
2. Turn the ignition switch ON.
3. Clear DTC stored in ECU by depressing the brake pedal 8 or more times within 5 seconds
4. Check that the ABS warning light and VSC warning light shows the normal code.
5. Remove the SST from the DLC3.
SST 09843 - 18040

HINT: Disconnect the battery cable during repairs will not erase the DTC in the ECU.

With LEXUS hand-held tester

Clear the DTC.

1. Turn the ignition switch ON.
2. Operate the LEXUS hand-held tester to erase the codes.

HINT: Please refer to the LEXUS hand-held tester operator's manual for further details.