Oil Filter: Service and Repair
REPLACEMENT1. REMOVE ENGINE UNDER COVER
2. DRAIN ENGINE OIL
3. REMOVE OIL FILTER SUB-ASSY
SST 09228-07501
4. INSTALL OIL FILTER SUB-ASSY
a. Tighten the oil filter by hand until the oil filter touches the surface of the oil filter bracket.
b. Using SST, give the oil filter additional 3/4 turning to set the filter.
SST 09228-07501
5. ADD ENGINE OIL
a. Install a new gasket and the drain plug.
Torque: 39 Nm (400 kgf-cm, 29 ft. lbs.)
b. Add new oil.
Oil capacity
c. Reinstall the oil filter cap.
6. CHECK ENGINE OIL LEAK
7. CHECK ENGINE OIL LEVEL
8. INSTALL ENGINE UNDER COVER