Rear License Plate - Installation

PRODUCT GENERAL INFORMATION
PG022-01

January 19, 2001

Title:
REAR LICENSE PLATE INSTALLATION

Models:
'02 SC 430

Introduction

The installation procedure for the rear license plate on the 2002 model year SC 430 is outlined below.

Applicable Vehicles
^ 2002 model year SC 430 vehicles.

Installation





1. Align the installation holes of the rear license plate with the dimples on the rear bumper.

2. Using two self-tapping screws, install the rear license plate by directly screwing the self-tapping screws into the dimples.

NOTE:
Do NOT drill holes in the dimples.





Self-tapping screws with the following dimensions should be used:

Nominal Length (L): 23.0 mm (0.9 in.)

Diameter (D): 6.0 mm (0.24 in.)





Warranty Information