Trunk / Liftgate: Adjustments

LUGGAGE COMPARTMENT DOOR






HINT: Since the centering bolt is used as a door hinge set bolt, the door can not be adjusted with it on. Substitute a bolt with washer for the centering bolt.




1. INSPECT LUGGAGE COMPARTMENT DOOR PANEL SUB-ASSEMBLY
a. Check that the clearance is within the standard value.

2. REMOVE LUGGAGE COMPARTMENT DOOR COVER
a. Using a screwdriver, remove the 12 clips and luggage compartment door cover.

3. REMOVE LUGGAGE COMPARTMENT FLOOR MAT

4. REMOVE LUGGAGE COMPARTMENT TRIM HOOK NO.1

5. REMOVE REAR FLOOR FINISH PLATE

6. ADJUST LUGGAGE COMPARTMENT DOOR PANEL SUB-ASSEMBLY




a. For forward/rearward and right/left adjustments, loosen the bolts.

b. For a vertical adjustment of the door front end, increase or decrease the number of washers between the hinge and door.




c. Using a hammer and a brass bar, tap the striker to adjust it.