System Inspection

1. HEADLAMP DIMMER SWITCH ASSY




a. Inspect light control switch continuity.
1. Check that there is continuity between terminals at each switch position as shown in the chart.




b. Inspect headlight dimmer switch continuity.
1. Check that there is continuity between terminals at each switch position as shown in the chart.




c. Inspect turn signal switch continuity.
1. Check that there is continuity between terminals at each switch position as shown in the chart.




d. Inspect front fog light switch continuity.
1. Check that there is continuity between terminals at each switch position as shown in the chart.




2. HAZARD WARNING SIGNAL SWITCH ASSY




a. Check that there is continuity between terminals at each switch position as shown in the chart.

b. Inspect illumination operation.
1. Connect the positive (+) lead from the battery to terminal 8 and negative (-) lead to terminal 9, then check that the illumination lights up.




3. LUGGAGE COMPARTMENT DOOR LOCK ASSY
a. Inspect luggage compartment door courtesy lamp switch continuity.
1. Check that there is continuity between terminal 2 and body ground when switch is operated.

Standard:
ON (When shaft is pressed): No continuity
OFF (When shaft is not pressed): Continuity







4. FOG LAMP RELAY
a. Inspect relay continuity.




5. ROOF CONSOLE BOX ASSY
a. Inspect map lamp continuity.
1. Check that there is continuity between terminal 6 and 7 when switch is operated.

Standard:
ON: Continuity
OFF: No Continuity

Standard:

6. ROOM LAMP ASSY NO.1
a. Inspect room lamp assy No.1 continuity.
1. Check that there is continuity between terminals at each switch position as shown in the chart.

7. COURTESY LAMP ASSY
a. Inspect courtesy lamp assy continuity.
1. Check that there is continuity between terminals when switch is operated.

Standard:
ON (When shaft is pressed): No continuity
OFF (When shaft is not pressed): Continuity

8. GLOVE BOX LAMP ASSY
a. Inspect glove box lamp assy continuity.
1. Check that there is continuity between terminals when switch is operated.

Standard:
ON (When shaft is pressed): No continuity
OFF (When shaft is not pressed): Continuity

9. LUGGAGE COMPARTMENT LAMP ASSY NO.1
a. Inspect luggage compartment lamp assy No.1.
b. Check that there is continuity between terminals when switch is operated.

Standard:
ON: Continuity
OFF: No continuity







10. TAILLAMP RELAY
a. Inspect relay continuity.







11. DAY TIME RUNNING LIGHT RELAY NO.1
a. Inspect relay continuity.







12. DAY TIME RUNNING LIGHT RELAY NO.2
a. Inspect relay continuity.