Component Tests and General Diagnostics

SEAT BELT WARNING SYSTEM

INSPECTION

1. INSPECT FRONT SEAT INNER BELT ASSY LH







a. When fastening the seat belt (buckle switches ON).
1. Inspect the continuity and resistance between the terminals.
If the result is not as specified, replace the front seat outer belt assembly.







b. When releasing the seat belt (buckle switches OFF).
1. Inspect the continuity and resistance between the terminals.
If the result is not as specified, replace the front seat outer belt assembly.

2. INSPECT FRONT SEAT INNER BELT ASSY RH




a. Short between connector terminals 1 and 3 of the occupation sensor.







b. When fastening the seat belt (buckle switches ON).
1. Inspect the continuity and resistance between the terminals.
If the result is not as specified, replace the front seat outer belt assembly.







c. When releasing the seat belt (buckle switches OFF).
1. Inspect the continuity and resistance between the terminals.
If the result is not as specified, replace the front seat outer belt assembly.




d. Release the between terminals 1 and 3 of the occupation sensor connector.







e. When fastening the seat belt (buckle switches ON).
1. Inspect the continuity and resistance between the terminals.
If the result is not as specified, replace the front seat outer belt assembly.







f. When releasing the seat belt (buckle switches OFF).
1. Inspect the continuity and resistance between the terminals.
If the result is not as specified, replace the front seat outer belt assembly.