Rear Seat (Wagon)
DISASSEMBLY1. REMOVE REAR SEAT HEADRESTS
2. REMOVE REAR SEAT BACK CENTER HINGE SUB-ASSEMBLY
Remove the 2 bolts and rear seat center hinge sub-assembly.
3. REMOVE REAR SEAT BACK BOARD CARPET LH
a. Remove the 3 screws and rear seat back lock cover LH.
b. Using a screwdriver, remove the seat back board carpet LH.
HINT: Tape the screwdriver tip before use.
4. REMOVE REAR SEAT BACK COVER LH
a. Remove the bolt and rear seat back hinge LH.
b. Remove the headrest supports.
c. Remove the rear back lock release button.
d. Remove the rear seat back stop button grommet.
e. Remove the hog rings and rear seat back cover with pad.
f. Remove the hog rings and rear seat back cover LH from the seat back pad.
5. REMOVE REAR SEAT BACK LOCK ASSEMBLY LH
Remove the 2 bolts and rear seat back lock assembly.
6. REMOVE REAR SEAT BACK BOARD CARPET RH
a. Remove the 3 screws and rear seat back lock cover RH.
b. Using a screwdriver, remove the rear seat back board carpet RH.
HINT: Tape the screwdriver tip before use.
7. REMOVE CENTER ARMREST
a. Remove the screw and center armrest hinge cover.
b. Remove the bolt and center armrest.
8. REMOVE REAR SEAT BACK COVER RH
a. Remove the bolt and rear seat back hinge RH.
b. Remove the headrest supports.
c. Remove the rear back lock release button.
d. Remove the rear seat back stop button grommet.
e. Remove the hog rings and rear seat back cover with pad from the seat back frame.
f. Remove the hog rings and rear seat back cover RH from the seat back pad.
9. REMOVE REAR SEAT BACK LOCK ASSEMBLY RH
Remove the 2 bolts and rear seat back lock assembly RH.
10. REMOVE REAR SEAT CUSHION COVER
Remove the hog rings and rear seat cushion cover from the seat cushion pad.
REASSEMBLY
1. INSTALL REAR SEAT CUSHION COVER
Install the rear seat cushion cover with new hog rings to the front of seat cushion pad.
HINT: When installing the hog rings, take care to prevent wrinkles as much as possible.
2. INSTALL REAR SEATBACK LOCK ASSEMBLY RH
3. INSTALL REAR SEATBACK COVER RH
a. Install rear seatback cover with new hog rings to the seatback pad.
HINT: When installing the hog rings, take care to prevent wrinkles as much as possible.
b. Install seatback cover with pad to the seatback frame with new hog rings.
HINT: When installing the hog rings, take care to prevent wrinkles as much as possible.
c. Install the 6 headrest supports.
d. Install the rear seatback stop button grommet.
e. Install the rear back lock release button.
f. Install the bolt and rear seatback hinge RH.
Torque: 21 N.m (214 kgf.cm, 15 ft.lbf)
4. INSTALL CENTER ARMREST
a. Install the center armrest with the bolt.
b. Install the center armrest hinge cover with the screw.
5. INSTALL SEATBACK BOARD CARPET RH
a. Install the seatback board carpet RH.
b. Install the rear seatback lock cover RH.
6. INSTALL REAR SEATBACK LOCK ASSEMBLY LH
7. INSTALL SEATBACK COVER LH
a. Install rear seatback cover with new hog rings to the seatback pad.
HINT: When installing the hog rings, take care to prevent wrinkles as much as possible.
b. Install seatback cover with pad to the seatback frame with new hog rings.
HINT: When installing the hog rings, take care to prevent wrinkles as much as possible.
c. Install the 6 headrest supports.
d. Install the rear seatback stop button grommet.
e. Install the rear back lock release button.
f. Install the bolt and rear seatback hinge LH.
Torque: 21 N.m (214 kgf.cm, 15 ft.lbf)
8. INSTALL SEATBACK BOARD CARPET RH
a. Install the seatback board carpet LH.
b. Install the rear seatback lock cover LH.
9. INSTALL REAR SEATBACK CENTER HINGE
Install the rear seat center hinge with the 2 bolts.
Torque: 21 N.m (214 kgf.cm, 15 ft.lbf)
10. INSTALL REAR SEAT HEADRESTS