Brake Lamp: Service and Repair

Stop Light System:

REMOVAL

1. w/o Spoiler:
REMOVE HI-MOUNTED STOP LIGHT ASSEMBLY

HINT: Installation is in the reverse order of removal. Only if there is a specified procedure for installation it is shown.




a. Insert the clip remover in the position as shown in the illustration, pull it upwards, and disconnect the engagement of the 2 front claws.
b. Pull the center stop light assembly in the direction as shown in the illustration, and disconnect the engagement of 4 claws.




c. Separate the connector, and remove the center stop light assembly.




2. w/o Spoiler:
REMOVE HI-MOUNTED STOP LIGHT BULB

HINT: Installation is in the reverse order of removal. Only if there is a specified procedure for installation it is shown.

a. Remove center stop light assembly.
b. Remove the bulb sockets and bulbs.