Troubleshooting
DTC P0617 Starter Relay Circuit HighCIRCUIT DESCRIPTION
DTC Detection Condition:
While the engine is being cranked, the battery positive voltage is applied to terminal STA of the ECM.
Wiring Diagram:
INSPECTION PROCEDURE
HINT: This diagnostic chart is based on the premise that the engine is cranked normally If the engine is not cranked, proceed to the problem symptoms table.
Step 1 - 2:
Step 3 - 4:
Step 5 - 6:
Hand-held tester
Step 1:
Step 2 - 4:
Step 5 - 6:
OBD II scan tool (excluding hand-held tester)