On Vehicle Inspection

INJECTOR

ON-VEHICLE INSPECTION
1. REMOVE V-BANK COVER
2. REMOVE INTAKE AIR CONNECTOR
3. INSPECT INJECTOR RESISTANCE
a. Disconnect the 8 injector connectors.




b. Using a ohmmeter measure the resistance between the terminals.

Resistance: 13.4 - 14.2 Ohm at 2O °C (68 °F)

If the resistance is not as specified, replace the injector.

c. Reconnect the 8 injector connectors.

4. REINSTALL INTAKE AIR CONNECTOR
5. REINSTALL V-BANK COVER