Front

FRONT HEIGHT CONTROL SENSOR AND ACCELERATION SENSOR






REMOVAL
1. REMOVE FRONT WHEEL
2. REMOVE FRONT LEFT FENDER LINER
3. DISCONNECT CONNECTOR





4. REMOVE FRONT HEIGHT CONTROL SENSOR AND ACCELERATION SENSOR
a. Place matchmarks on the link and bracket.
b. Remove the nut and disconnect the sensor link.
c. Remove the 2 bolts and height control sensor.

INSTALLATION
1. INSTALL FRONT HEIGHT CONTROL SENSOR AND ACCELERATION SENSOR
a. Align the matchmarks on the height control sensor link and bracket.
b. Install the nut and connect the sensor link.
Torque: 5.4 Nm (55 kgf-cm, 48 inch lbs.)
c. Install the front height control sensor and acceleration sensor with the 2 bolts.
Torque: 7.8 Nm (80 kgf-cm, 69 inch lbs.)
2. CONNECT CONNECTOR
3. INSTALL FRONT LEFT FENDER LINER
4. INSTALL FRONT WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)
5. CHECK VEHICLE HEIGHT