With Manufacturer's Scan Tool

a. Check the indicator light.
1. Set the absorber control switch to "NORM".
2. Turn the ignition switch ON and check that the absorber control indicator light goes on for 2 seconds.

HINT: If the indicator check result is not normal, proceed to troubleshooting for the absorber control indicator light circuit.

3. Start the engine.




4. Turn the absorber control switch "SPORT" and check the absorber control indicator light.




b. In case of using LEXUS hand-held tester:
Check the DTC.

1. Hook up the LEXUS hand-held tester to the DLC3.
2. Turn the ignition switch ON.
3. Read the DTC by given the prompts on the tester screen.

HINT: Please refer to the LEXUS hand-held tester operator's manual for further details.