Pinout Values and Diagnostic Parameters
TERMINALS OF ECU1. INSPECT THEFT WARNING ECU
Terminals Of ECU - Theft Warning ECU Part 1:
Terminals Of ECU - Theft Warning ECU Part 2:
a. Disconnect the the T7 ECU connector, and check the voltage or continuity between each terminal of the wire harness side connector.
2. INSPECT DRIVER SIDE JUNCTION BLOCK
Terminals Of ECU - Driver Side Junction Block Part 1:
Terminals Of ECU - Driver Side Junction Block Part 2:
a. Disconnect the the D4 and D5 driver side J/B connectors, and check the voltage or continuity between each terminal of the wire harness side connectors.
Terminals Of ECU - Driver Side Junction Block Part 3:
b. Reconnect the wire harness side connector to the driver side J/B, and check the voltage between the terminal of the connector.
3. INSPECT LUGGAGE ROOM JUNCTION BLOCK
Terminals Of ECU - Luggage Room Junction Block Part 1:
Terminals Of ECU - Luggage Room Junction Block Part 2:
a. Disconnect the the each luggage room J/B connectors, and check the voltage or continuity of each terminal of the wire harness side connectors.
Terminals Of ECU - Luggage Room Junction Block Part 3:
b. Reconnect the wire harness side connector to the luggage room J/B and inspect the connector from the back side.
If the result is not as specified, the wire harness side may malfunction.