Pinout Values and Diagnostic Parameters
TERMINALS OF ECU1. MULTIPLEX NETWORK DOOR COMPUTER FRONT LH
Terminals Of ECU - Multiplex Network Door Computer Front LH Part 1:
a. Disconnect the ECU connectors D17, D18 and D19
Terminals Of ECU - Multiplex Network Door Computer Front LH Part 2:
b. Check the voltage and continuity between each terminal of the vehicle's side connectors.
c. Connect the ECU connectors D17, D18 and D19.
Terminals Of ECU - Multiplex Network Door Computer Front LH Part 3:
d. Check the voltage between each terminal of the connectors.
HINT: If the value is not as specified, a malformation exists in the door ECU or the communication line.
2. MULTIPLEX NETWORK DOOR COMPUTER FRONT RH
Terminals Of ECU - Multiplex Network Door Computer Front RH Part 1:
a. Disconnect the ECU connectors P9, P10 and P11.
Terminals Of ECU - Multiplex Network Door Computer Front RH Part 2:
b. Check the voltage and continuity between each terminal of the vehicle's side connectors.
c. Connect the ECU connectors P9, P10 and P11.
Terminals Of ECU - Multiplex Network Door Computer Front RH Part 3:
d. Check the voltage between each terminal of the connectors.
HINT: If the value is not as specified, a malformation exists in the door ECU or the communication line.
3. THEFT WARNING COMPUTER
Terminals Of ECU - Theft Warning Computer Part 1:
a. Disconnect the ECU T7 connector.
Terminals Of ECU - Theft Warning Computer Part 2:
b. Check the voltage and continuity between each terminal of the vehicle's side connectors.
HINT: If the value is not as specified, the vehicle side may be defective.
4. TRANSPONDER KEY COMPUTER ASSEMBLY
Terminals Of ECU - Transponder Key Computer Assembly Part 1:
Terminals Of ECU - Transponder Key Computer Assembly Part 2:
a. Disconnect the ECU T7 connector
b. Check the voltage and continuity between each terminal of the vehicle's side connectors.
HINT: If the value is not as specified, the vehicle side may be defective.