Tail Lamp: Service and Repair

Lighting Part 1:

Lighting Part 2:

Lighting Part 3:

REAR COMBINATION LAMP LENS LH

REPLACEMENT

1. REMOVE TONNEAU COVER STOPPER SUB-ASSY LH
2. REMOVE REAR FLOOR FINISH PLATE
3. REMOVE LUGGAGE COMPARTMENT FLOOR MAT
4. REMOVE LUGGAGE COMPARTMENT TRIM COVER LH
5. REMOVE LUGGAGE COMPARTMENT TRIM COVER RH
6. REMOVE SPARE WHEEL COVER ASSY
7. REMOVE TOOL BOX COVER
8. REMOVE LUGGAGE COMPARTMENT TRIM COVER SUB-ASSY REAR
9. REMOVE TONNEAU COVER ASSY
10. REMOVE LUGGAGE COMPARTMENT TRIM COVER INNER LOWER
11. REMOVE LUGGAGE COMPARTMENT TRIM COVER FRONT
12. REMOVE LUGGAGE COMPARTMENT TRIM COVER SIDE LH

13. REMOVE REAR LAMP COVER LH
a. Using a screwdriver, remove the rear lamp cover LH.




14. REMOVE REAR COMBINATION LAMP LENS LH
a. Remove the bolt.
b. Pull out the rear combination lamp lens LH forward, then disconnect the 2 pins and rear combination lamp guide of body side.
c. Remove the 2 bulb sockets and rear combination lamp lens LH.