Brake

ON-VEHICLE INSPECTION





1. INSPECT BRAKE LINE PIPES AND HOSES

HINT: Check in a well lighted area. Check the entire circumference and length of the brake hoses using a mirror as required. Turn the front wheels fully right or left before checking the front brake.

a. Check all brake lines and hoses for.
^ Damage
^ Wear
^ Deformation
^ Cracks
^ Corrosion
^ Leaks
^ Bends
^ Twists
b. Check all clamps for tightness and connections for leakage.
c. Check that the hoses and lines are clear of sharp edges, moving parts and the exhaust system.
d. Check that the lines install in grommets pass through the center of the grommets.
2. INSPECT FRONT BRAKE PADS AND DISCS
3. INSPECT REAR BRAKE PADS AND DISCS
4. INSPECT OR CHANGE BRAKE FLUID
Fluid: SAE J1703 or FMVSS No.116 DOT3