Check DLC3

DATA LINK CONNECTOR 3 (DLC3)







The tire pressure control ECU uses ISO 14230 for communication. The terminal arrangement of DLC3 complies with SAE J1962 and matches the ISO 14230 format.

HINT: If the display shows "UNABLE TO CONNECT TO VEHICLE" when the LEXUS hand-held tester cable is connected to DLC3, the ignition switch is turned ON and the LEXUS hand-held tester is operated, there is a problem on the vehicle side or the tester side.

- If communication is normal when the tester is connected to another vehicle, inspect DLC3 on the original vehicle.
- If communication is still not possible when the tester is connected to another vehicle, the problem is probably in the tester itself, so consult the Service Department listed in the tester's Operator's Manual