Removal and Installation of Fuel Control Parts

REMOVAL AND INSTALLATION OF FUEL CONTROL PARTS

a. PLACE FOR REMOVING AND INSTALLING OF FUEL SYSTEM PARTS
1. Place with good air ventilation and without anything flammable such as welder, grinder, drill, electric motor or stove in the surroundings.

2. Never work in a place like a pit or nearby pit, as there is a possibility that vaporized fuel fills those places.

b. REMOVING AND INSTALLING OF FUEL SYSTEM PARTS
1. Prepare a fire extinguisher before starting the operation.

2. For prevention of the static electricity, install a ground on the fuel changer, vehicle and fuel tank, and do not spray much water so as to prevent slipping.

3. Never use any electric equipment like an electric motor or a working light, as they may cause spark or high temperature.

4. Never use an iron hammer, as it may cause spark.

5. Dispose of the shop rag separately from any fuel deposit.