Crankshaft Main Bearing
Crankshaft bearing cap bolt tension portion diameterSTD 7.500 - 7.600 mm (0.2953 - 0.2992 inch)
Minimum 7.20 mm (0.2835 inch)
Crankshaft bearing center wall thickness (Reference)
No.1 and No. 5
Mark
3 2.492 - 2.495 mm (0.0981 - 0.0932 inch)
4 2.495 -2.498 mm (0.0982 - 0.0933 inch)
5 2.498 - 2.501 mm (0.0983 - 0.0985 inch)
6 2.501 -2.504 mm (0.0985 - 0.0986 inch)
7 2.504 - 2.507 mm (0.0986 - 0.0917 inch)
Others
Mark
1 2.486 - 2.489 mm (0.0979 - 0.0980 inch)
2 2.489 - 2.492 mm (0.0980 - 0.0981 inch)
3 2.492 - 2.495 mm (0.0981 - 0.0982 inch)
4 2.495 - 2.498 mm (0.0982 - 0.0983 inch)
5 2.498 - 2.501 mm (0.0983 - 0.0985 inch)
Crankshaft bearing cap x Cylinder block
2 progressive type
1st 27 Nm (275 kgf-cm, 20 ft. lbs.)
2nd Turn 90° (Turn 90°, Turn 90°)
Others 49 Nm (500 kgf-cm, 36 ft. lbs.)