Component Tests and General Diagnostics

WHEEL AND TIRE SYSTEM
INSPECTION
1. INSPECT TIRE
a. Check the tires for wear and proper inflation pressure.





Cold tire inflation pressure





b. Check the tire runout.
Tire runout: 1.4 mm (0.055 inch) or less





2. ROTATE TIRE

HINT: See the illustration for where to rotate each tire.

3. INSPECT WHEEL BALANCE





a. Check and adjust off-the-car balance





b. If necessary, check and adjust on-the-car balance. Unbalance after adjustment: 8.0 g (0.018 lb) or less

NOTICE:
^ Remove dirt, oil and water from the surface where the balance weight is to be adhered with a cleaning detergent.
^ Do not touch the sticking surface of the tape.
^ Adhere the sticking type balance weight to the flat position shown in the illustration.
^ Push the balance weight securely with a finger to ad here it to the position. (Pushing force: 10 kgf/more than 2 secs.)
^ Do not reuse balance weight.
^ Please use the LEXUS genuine sticking type balance weight.

4. INSPECT BEARING BACKLASH
5. INSPECT AXLE HUB DEVIATION
6. INSPECT BEARING BACKLASH
7. INSPECT AXLE HUB DEVIATION