Window Frame: Service and Repair

Back Window Frame Sub-Assy Upper:

OVERHAUL

1. MOVE ROOF PANEL TO HALF




a. Referring to the manual operation procedures, half-open the roof.

2. REMOVE ROOF SIDE GARNISH INNER RH




a. Using a clip remover, remove the clip.
b. Using a screwdriver, disengage the 7 clips.

HINT: Tape the screwdriver tip before use.

c. Remove the inner roof side garnish RH.

3. REMOVE ROOF SIDE GARNISH INNER LH

4. REMOVE ROOF HEADLINING ASSEMBLY REAR




a. Using a screwdriver, disengage the 7 clips.

HINT: Tape the screwdriver tip before use.

b. Remove the rear roof headlining rear.

5. REMOVE BACK WINDOW FRAME SUB-ASSEMBLY UPPER




a. Using a torx socket, remove the 8 screws.

Torx socket (T40): 09042-00020

b. Remove the back window frame.




6. REMOVE REMOVABLE ROOF WEATHERSTRIP REAR
a. Remove the 4 screws, 2 nuts and 4 clips.
b. Using a clip remover, disengage the clips.

HINT: Tape the screwdriver tip before use.

c. Remove the removable roof weatherstrip rear.




7. REMOVE ROOF SIDE RAIL WEATHER STRIP RETAINER REAR RH
a. Remove the 4 screws and rear roof side rail weatherstrip retainer RH.

8. REMOVE ROOF SIDE RAIL WEATHER STRIP RETAINER REAR LH
9. REMOVE BACK WINDOW OUTSIDE MOULDING
10. REMOVE BACK WINDOW GLASS
11. CLEAN BACK WINDOW GLASS
12. INSTALL BACK WINDOW GLASS ADHESIVE DAM
13. INSTALL BACK WINDOW GLASS
14. INSTALL ROOF SIDE RAIL WEATHER STRIP RETAINER REAR LH
15. INSTALL ROOF SIDE RAIL WEATHER STRIP RETAINER REAR RH
16. INSTALL REMOVABLE ROOF WEATHERSTRIP REAR
17. INSTALL BACK WINDOW FRAME SUB-ASSEMBLY UPPER

Torque: 40 N.m (408 kgf.cm, 30 ft.lbf)

18. INSTALL ROOF HEADLINING ASSEMBLY REAR
19. INSTALL ROOF SIDE GARNISH INNER LH
20. INSTALL ROOF SIDE GARNISH INNER RH
21. INSPECT FOR LEAK AND REPAIR