Fluid Drain & Refill

Replace the ATF





(1) Remove the drain plug and drain the fluid.
(2) Reinstall the drain plug securely.
(3) With the engine OFF, add new fluid through the oil filler pipe.

ATF Specifications:

(4) Start the engine and shift the shift lever into all positions from P to L and then shift into the P position.
(5) With the engine idling, check the fluid level. Add fluid to the COOL level on the dipstick.





(6) Check the fluid level at the normal operating temperature of 158 - 176 °F (70 - 80°C), and add if necessary.

NOTICE: Do not overfill.
- Check the fluid leak.
- Check for leak in the transaxle.

If there are leaks, it is necessary to repair or replace O-rings, gaskets, oil seals, plugs or other parts.