Connecting Rod, Engine

Connecting rod thrust clearance
Standard 0.15 to 0.30 mm (0.0059 to 0.0118 inch)
Maximum 0.35 mm (0.0138 inch)
Connecting rod oil clearance
Standard 0.038 to 0.066 mm (0.0015 to 0.0026 inch)
Maximum 0.08 mm (0.0031 inch)
Connecting rod out-of alignment
Maximum per 100 mm (3.94 inch) 0.05 mm (0.0020 inch)
Connecting rod twist
Maximum per 100 mm (3.94 inch) 0.15 mm (0.0059 inch)
Connecting rod bush inside diameter 22.005 to 22.014 mm (0.8663 to 0.8667 inch)
Connecting rod bolt diameter
Standard 7.2 to 7.3 mm (0.283 to 0.287 inch)
Minimum 7.0 mm (0.276 inch)
Connecting rod cap x Connecting rod
1st 25 Nm (250 kgf-cm, 18 ft. lbs.)
2nd Turn 90°, Turn 90°, Turn 90°