Front Seat
REMOVALREMOVE FRONT SEAT
a. Using a screwdriver, remove the cap.
HINT: Tape the screwdriver tip before use.
b. Remove the front seat outer belt floor anchor bolts and seat belt anchor.
c. Using a screwdriver, remove the seat track covers.
HINT: Tape the screwdriver tip before use.
d. Remove the 4 bolts.
e. Disconnect the connectors.
f. Remove the front seat.
NOTE: Be careful not to damage the body.
INSTALLATION
INSTALL FRONT SEAT
a. Mount the front seat to the vehicle.
b. Connect the connectors.
c. Slide the front seat to the rearmost position.
d. Tighten the bolts on the front side temporarily, from the bolt on the outer side tighten them completely.
Torque: 37 N.m (375 kgf.cm, 27 ft.lbf)
e. Slide the front seat to the most front position.
f. Tighten the bolts on the rear side temporarily, from the bolt on the outer side tighten them completely.
Torque: 37 N.m (375 kgf.cm, 27 ft.lbf)
g. Install the seat track covers.
h. Install the front seat outer belt floor anchor to the front seat and tighten the bolt.
Torque: 42 N.m (430 kgf.cm, 31 ft.lbf)
i. Install the cap.