Rear Seat (Sedan)
DISASSEMBLY1. REMOVE HEADRESTS
2. REMOVE REAR SEAT BELT SHOULDER GUIDES
Remove the 4 screws and rear seat belt shoulder guides.
3. REMOVE REAR SEAT CENTER ARMREST
a. Remove the 2 nuts and rear seat center armrest with bracket.
b. Remove the 2 screws and armrest bracket.
4. REMOVE SEATBACK COVER
a. Remove the 4 headrest supports.
b. Remove the hog rings on the back of seatback assembly.
c. Remove the center headrest supports.
d. Remove the hog rings and seatback cover on the front of seatback assembly.
5. REMOVE SEAT CUSHION COVER
a. Remove the hog rings on the back of seat cushion assembly.
b. Remove the hog rings and seat cushion cover on the front of the seat cushion assembly.
6. REMOVE REAR SEAT CENTER ARMREST DOOR, DOOR LOCK, PATCH AND STOPPER
a. Remove the rear seat center armrest door from the rear seat center armrest box.
b. Remove the 2 screws and door lock.
c. Remove the 2 screws and patch.
d. Remove the 2 door stoppers.
e. Remove the 2 screws, 2 shims and rear seat center armrest door.
7. REMOVE REAR SEAT CENTER ARMREST BRACKETS FROM REAR SEAT CENTER ARMREST BOX
a. Using a drill of less than 4.0 mm (0.157 in.), drill out the rivet heads.
HINT: Gently and vertically put the drill to the rivet, and cut the rivet flanges.
CAUTION: Take care as the cut rivet is hot.
NOTE: Prizing the hole with a drill can lead to damage to the rivet hole or breaking the drill.
b. Remove the rear seat center armrest brackets.
REASSEMBLY
1. INSTALL REAR SEAT CENTER ARMREST BRACKETS TO REAR SEAT CENTER ARMREST BOX
Using a air riveter with nose piece No. 1, install the rivets to the brackets and box.
NOTE:
- Do not prize a riveter. It could damage the riveter and cause loose fitting and mandrel bend.
- Do not tilt the riveter when fastening the rivet to the material to avoid loose fitting.
- Do not allow gap spacing between the rivet head and the material.
- Do not allow gap spacing between the materials.
2. INSTALL REAR SEAT CENTER ARMREST DOOR, DOOR LOCK, PATCH AND STOPPER
a. Install the rear seat center armrest door with the 2 shims and 2 screws.
b. Install the 2 door stoppers.
c. Install the patch with the 2 screws.
d. Install the door lock with the 2 screws.
e. Install the rear seat center armrest door to the rear seat center armrest box.
3. INSTALL SEAT CUSHION COVER
a. Install the seat cushion cover with new hog rings to the front of seat cushion assembly.
HINT: When installing the hog rings, take care to prevent wrinkles as much as possible.
b. Install new hog rings to the back of seat cushion assembly.
HINT: When installing the hog rings, take care to prevent wrinkles as much as possible.
4. INSTALL SEATBACK COVER
a. Install seatback cover with new hog rings to the front of seatback assembly.
HINT: When installing the hog rings, take care to prevent wrinkles as much as possible.
b. Install the center headrest supports.
c. Install new hog rings on the back of seatback assembly.
HINT: When installing the hog rings, take care to prevent wrinkles as much as possible.
d. Install the 4 headrest supports.
5. INSTALL REAR SEAT CENTER ARMREST
a. Install the armrest bracket with the 2 screws to the rear seat center armrest.
b. Install the rear seat center armrest with the bracket to the seatback assembly with the 2 nuts.
6. INSTALL REAR SEAT BELT SHOULDER GUIDES
Install the rear seat belt shoulder guides with the 4 screws to the seatback assembly.
7. INSTALL HEADRESTS