Speed Sensor, Front

REMOVAL
1. REMOVE FRONT WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)





2. DISCONNECT SPEED SENSOR CONNECTOR
a. Remove the engine under cover and fender liner.
b. Disconnect the speed sensor connector.





3. REMOVE SPEED SENSOR
a. LH side: Disconnect the harness clamp.
b. Remove the resin clip and 2 clamp bolts holding the sensor harness to the body.
Torque: 5.0 Nm (51 kgf-cm, 44 inch lbs.)
c. Remove the bolt and speed sensor from the steering knuckle.
Torque: 8.0 Nm (82 kgf-cm, 71 inch lbs.)

INSTALLATION
Installation is in the reverse order of removal.

HINT: After installation, check speed sensor signal.