Removal and Installation

Condenser Fan (Part 1):

REMOVAL

1. DRAIN ENGINE COOLANT FROM RADIATOR

HINT: It is not necessary to drain out all coolant.

2. REMOVE AIR CLEANER INLET
3. REMOVE AIR CLEANER AND MAF METER ASSEMBLY

4. REMOVE COOLING FAN
a. Disconnect the upper radiator hose from the radiator.
b. Disconnect the ECM outlet duct from the ECM box.
c. Disconnect the wire for cooling fan from the clamp on the cooling fan.
d. Disconnect the 2 cooling fan connector.
e. Disconnect the radiator reservoir hose from the radiator.




f. Remove the 6 bolts and cooling fan.

INSTALLATION




1. INSTALL COOLING FAN
a. Install the cooling fan with the 6 bolts.

Torque: 5.0 N.m (50 kgf.cm, 44 in.lbf)

b. Connect the upper radiator hose to the radiator.
c. Connect the ECM outlet duct to the ECM box.
d. Connect the wire for cooling fan to clamp on the cooling fan.
e. Connect the 2 cooling fan connectors.
f. Connect the radiator reservoir hose to the radiator.

2. INSTALL AIR CLEANER AND MAF METER ASSEMBLY
3. INSTALL AIR CLEANER INLET
4. FILL WITH ENGINE COOLANT
5. START ENGINE AND CHECK FOR COOLANT LEAKS