ABS (Antilock Brake System)
DIAGNOSTIC TROUBLE CODE CHARTHINT: If a malfunction code is displayed during the DTC check, check the circuit indicated by the DTC. For details of each code, for the respective "DTC No." in the DTC chart.
C0200/31 - C1225/25:
C1235/35 - U0124/95:
DTC chart of ABS:
*1, *2:
Even after the troubled areas are repaired, ABS warning light will not go off unless the following operations are performed.
- *1:
1. Drive the vehicle at 12 mph (20 km/h) for 30 seconds or more and check that the ABS warning light goes off.
2. Clear the DTC.
- *2:
1. Keep the vehicle in the stationary condition for 5 seconds or more and depress the brake pedal lightly 2 or 3 times.
2. Drive the vehicle at the vehicle speed of 31 mph (50 km/h) and keep depressing the brake pedal strongly for approximately 3 seconds.
3. Repeat the above operation 3 times or more and check that the ABS warning light goes off.
4. Clear the DTC.
HINT: In some cases, the hand-held tester cannot be used when ABS warning light remains on.
C1201/51 - U0126/63:
DTC chart of VSC:
HINT: In some cases, the hand-held tester cannot be used when VSC warning light is always on.
C1271/71 - C0371/71:
DTC of TEST MODE CODE:
HINT: The codes in this table are output only in TEST MODE.