Inner Rear View Mirror Assy
INNER REAR VIEW MIRROR ASSYINSPECTION
1. INSPECT INNER REAR VIEW MIRROR ASSY
a. Check operation of the electrochromic inner mirror.
1. Connect the battery positive (+) lead to terminal 1 and the negative (-) lead to terminal 4.
2. Attach black colored tape to the forward sensor to prevent it from sensing.
3. Shine an electric light on the mirror. Check that the mirror surface changes from bright to dark.
If the result is not as specified, replace the mirror assy.
2. INSPECT OUTER REAR VIEW MIRROR ASSY LH
a. Disconnect the mirror connector.
b. Apply battery voltage to the mirror and check operation of the mirror face.
If the result is not as specified, replace the mirror assy.
3. INSPECT OUTER REAR VIEW MIRROR ASSY RH
a. Disconnect the mirror connector.
b. Apply battery voltage to the mirror and check operation of the mirror face.
If the result is not as specified, replace the mirror assy.