Step Light and Inside Handle Illumination Operation Check
STEP LIGHT AND INSIDE HANDLE ILLUMINATION OPERATION CHECKa. Check that the lamps come on when unlocking any of the doors that are closed and locked with the ignition switch off. Then check that the lamps fade out under the following conditions:
1. Leave the doors unlocked for 15 seconds.
2. Lock all the closed doors and turn the ignition switch off.
b. Check that the lamps stay on for at least 15 seconds under the following conditions before going off under the conditions as shown in (a).
1. Turn the ignition switch to the ON position, and adjust the shift lever to the P position.
2. Open any of the doors.
c. Check that the lamps dim before going off when turning the ignition switch to the ON position and shifting into any position other than P under the conditions as shown in (a).
d. Check the conditions below before the lamps go off under the conditions as shown in (b).
1. The lamps dim when shifting into the position other than P and closing all the doors with the ignition switch on.
2. The lamps come on for 15 seconds and fade out when shifting into the P position and closing all the doors with the ignition switch off.
e. Check that the lamps come on after opening any of the doors.
f. Check that the lamps fade out in 15 seconds after closing all the doors, or locking all the doors.
g. Check that the lamps come on gradually with the ignition switch on and the shift lever in the P position.
h. Check that the lamps dim when shifting from P into another position with all the doors closed.
i. Check that the lamps stay dimmed with the ignition switch on and the shift lever in any position other than P.