Computers and Control Systems: Technical Service Bulletins

• Customer Interest
  • Canada - Steering - Int. VSC Activation On Start Up
  • Canada - Engine Control - ECM Calibration for Low Speed Shiftin
  • Canada - Engine Control - MIL ON DTC P0133/P0153
  • Engine Controls - MIL ON/DTC's P0133/P0153 Set
  • Engine Controls - ECU Programming Error Displayed
  • Electrical - Multiple Systems Inop./DTC B1211/B1212
• By Symptom
  • Customer Interest
    • Canada - Steering - Int. VSC Activation On Start Up
    • Canada - Engine Control - ECM Calibration for Low Speed Shiftin
    • Canada - Engine Control - MIL ON DTC P0133/P0153
    • Engine Controls - MIL ON/DTC's P0133/P0153 Set
    • Engine Controls - ECU Programming Error Displayed
    • Electrical - Multiple Systems Inop./DTC B1211/B1212
  • Erratic Operation
    • Engine Controls - ECU Programming Error Displayed
  • False instrument warning light/gauges
    • Engine Controls - MIL ON/DTC's P0133/P0153 Set
  • Inoperative
    • Electrical - Multiple Systems Inop./DTC B1211/B1212
• All Technical Service Bulletins
  • Canada - Vehicle - Flood Damage Inspection
  • Canada - Engine Controls - Accelerator Pedal Sensor Precaution
  • Canada - Engine Control - ECM Reflash Procedure
  • Canada - Engine Control - TDT Lexus diagnostic Tester
  • Canada - Engine Control - Failure Initialize CAN Interface
  • Canada - Steering - Int. VSC Activation On Start Up
  • Canada - Engine Control - ECM Reprogramming Process
  • Canada - Engine Control - ECM Calibration for Low Speed Shiftin
  • Canada - Engine Control - Entering VIN ECM Replacement/DTC P063
  • Canada - Engine Control - Oxygen Sensor Location Identification
  • Canada - Engine Control - MIL ON DTC P0133/P0153
  • Canada - Engine Control - Diagnostic Tester
  • Canada - Engine Control - Software And Calibration Files TDT
  • Engine Controls - Techstream(R) ECU Re-Flash Procedure
  • Engine Controls - A/F And O2 Sensor Identification
  • Engine Controls - Entering VIN After PCM Replacement
  • Computers/Controls - CAN Interface Module Initialization
  • Engine Controls - MIL ON/DTC's P0133/P0153 Set
  • Engine Controls - ECU Programming Error Displayed
  • Engine Controls - ECM Memory Reset After A/T Service
  • Electrical - Multiple Systems Inop./DTC B1211/B1212
  • Engine Controls - Bank 1/Bank 2 O2 Sensor Identification
  • A/T - Park Neutral Position Switch Installation
  • Engine Controls - Accelerator Pedal Sensor Service Precautions
  • Canada - A/T - Park/Neutral Position Switch Installation