Pinout Values and Diagnostic Parameters
TERMINALS OF ECUTerminals Of ECU/Pinouts - Inspect Theft Warning ECU:
1. INSPECT THEFT WARNING ECU
a. Disconnect the the T7 ECU connector, and check the voltage or continuity between each terminal of the wire harness side connector.
If the result is not as specified, the wire harness side may malfunction.
Terminals Of ECU/Pinouts - Inspect Driver Junction Block:
2. INSPECT DRIVER SIDE JUNCTION BLOCK
a. Disconnect the the D4 and D5 driver side J/B connectors, and check the voltage or continuity between each terminal of the wire harness side connectors.
If the result is not as specified, the wire harness side may malfunction.
Terminals Of ECU/Pinouts:
b. Reconnect the wire harness side connector to the driver side J/B, and check the voltage between the terminal of the connector.
If the result is not as specified, the driver side J/B may malfunction.
Terminals Of ECU/Pinouts - Inspect Luggage Room Junction Block:
3. INSPECT LUGGAGE ROOM JUNCTION BLOCK
a. Disconnect the the each luggage room J/B connectors, and check the voltage or continuity of each terminal of the wire harness side connectors.
If the result is not as specified, the wire harness side may malfunction.
b. Reconnect the wire harness side connector to the luggage room J/B and inspect the connector from the back side.
If the result is not as specified, the luggage room J/B may malfunction.