Pinout Values and Diagnostic Parameters
TERMINALS OF ECUTerminals Of ECU/Pinouts - Multiplex Network Door Computer Front LH:
1. MULTIPLEX NETWORK DOOR COMPUTER FRONT LH
a. Disconnect the ECU connectors D17, D18 and D19.
b. Check the voltage and continuity between each terminal of the vehicle's side connectors.
c. Connect the ECU connectors D17, D18 and D19.
d. Check the voltage between each terminal of the connectors.
HINT: If the value is not as specified, a malfrunction exists in the door ECU or the communication line.
Terminals Of ECU/Pinouts - Multiplex Network Door Computer Front RH:
2. MULTIPLEX NETWORK DOOR COMPUTER FRONT RH
a. Disconnect the ECU connectors P9, P10 and P11.
b. Check the voltage and continuity between each terminal of the vehicle's side connectors.
c. Connect the ECU connectors P9, P10 and P11.
d. Check the voltage between each terminal of the connectors.
HINT: If the value is not as specified, a malfrunction exists in the door ECU or the communication line.
Terminals Of ECU/Pinouts - Theft Warning Computer:
3. THEFT WARNING COMPUTER
a. Disconnect the ECU T7 connector.
b. Check the voltage and continuity between each terminal of the vehicle's side connectors.
HINT: If the value is not as specified, the vehicle side may be defective.
Terminals Of ECU/Pinouts - Transponder Key Computer Assembly:
4. TRANSPONDER KEY COMPUTER ASSEMBLY
a. Disconnect the ECU T11 connector.
b. Check the voltage and continuity between each terminal of the vehicle's side connectors.
HINT: If the value is not as specified, the vehicle side may be defective.