MIL Circuit

MIL CIRCUIT

CIRCUIT DESCRIPTION

The Malfunction Indicator Light (MIL) is used to indicate the ECM's detection of a vehicle malfunction.

The instrument panel GAUGE fuse provides the circuit with power and the ECM provides the circuit ground that illuminates the MIL.

MIL operations should be checked visually:
The MIL should be illuminated when the ignition switch is turned ON. If the MIL is always ON or OFF, use the Intelligent Tester II and follow the procedures below to determine the cause of the problem.

If the ECM detects trouble, the MIL illuminates. At this time, the ECM records a DTC in the memory.

Wiring Diagram:

Step 1 - 4:

INSPECTION PROCEDURE






HINT: Troubleshoot each trouble symptom in accordance with the chart.