Data List

DATA LIST

HINT: According to the DATA LIST displayed by the OBD II scan tool or Hand-held tester, you can read the value of the switch, sensor, actuator and so on without parts removal. Reading the DATA LIST as a first step of troubleshooting is one of the method to shorten the labor time.

Part 1:

Part 2:

a. Warm up the engine.
b. Turn the ignition switch off.
c. Connect the OBD II scan tool or hand-held tester to the DLC3.
d. Turn the ignition switch to the ON position.
e. Push the"ON" button of the OBD II scan tool or the hand-held tester.
f. Select the item"DIAGNOSIS/ENHANCED OBD II/DATA LIST".
g. According to the display on tester, read the"DATA LIST".