Front Left Sensor

Air Bag Front RH Sensor:

AIRBAG SENSOR FRONT LH

REPLACEMENT

1. PRECAUTION
Refer to Air Bag Systems; Service Precautions.
2. DISCONNECT BATTERY NEGATIVE TERMINAL
3. REMOVE ENGINE UNDER COVER NO.2




4. REMOVE AIR BAG SENSOR FRONT LH
a. Remove the bolt and airbag sensor front LH.




b. Disconnect the connector from the airbag sensor front LH.

HINT: Insert a screw driver in any of the three opening sections of the sensor and slide the sensor to disconnect it from the connector.

5. INSPECT AIR BAG SENSOR FRONT LH
6. INSTALL AIR BAG SENSOR FRONT LH
a. Check that the ignition switch is OFF.
b. Check that the battery negative terminal is disconnected.

NOTE: Do not start the operation for 90 seconds after removing the terminal.

c. Install the front airbag sensor LH with the bolt.

Torque: 17.5 N.m (178 kgf.cm, 13 ft.lbf)

d. Connect the connector to the airbag sensor front LH.
e. Check that no play is identified.

7. INSPECT SRS WARNING LIGHT