For Vehicle Equipped With Vehicle Skid Control (Vsc) System

FOR VEHICLE EQUIPPED WITH VEHICLE SKID CONTROL (VSC) SYSTEM

NOTE: When using a 2-wheel drum tester such as a speedometer tester or chassis dynamometer, etc., or jacking up the rear wheels and driving the wheels, always push in the TRAC & VSC cut switch and turn the TRAC & VSC system OFF.




a. Press the VSC OFF switch.

b. Check that the VSC OFF indicator light comes ON.

HINT: The VSC OFF indicator light should be always OFF when the engine is restarted.




c. Begin measurements.




d. Press the VSC OFF switch again to change the TRAC & VSC system to operational condition and check that the VSC OFF indicator light goes off.

HINT: The SLIP indicator light blinks when the TRAC system is operational.