Overhaul

DISASSEMBLY




1. REMOVE DOOR INSIDE HANDLE BEZEL
Using a screwdriver, remove the door inside handle bezel.

HINT: Tape the screwdriver tip before use.

2. REMOVE LUGGAGE COMPARTMENT DOOR TRIM
a. Remove the 2 screws and luggage compartment door assist grip.
b. Remove the 14 clips and luggage compartment door trim.

3. REMOVE DOOR LOCK STRIKER
a. Remove the 2 bolts.

Torque: 5.5 N.m (56 kgf.cm, 49 in.lbf)

b. Remove the door lock striker.

4. REMOVE DOOR LOCK KEY CYLINDER
a. Remove the 2 bolts.
b. Disconnect the connector.
c. Disconnect the link and remove the door lock key cylinder.




5. REMOVE LUGGAGE COMPARTMENT DOOR LOCK
a. Disconnect the connector.
b. Remove the 2 bolts and luggage compartment door lock.

Torque: 5.5 N.m (56 kgf.cm, 49 in.lbf)

6. REMOVE REAR LIGHT
7. REMOVE LUGGAGE COMPARTMENT DOOR OUTER GARNISH
8. REMOVE LICENCE PLATE LIGHT

REASSEMBLY
Reassembly is in the reverse order of disassembly.