Inner Rear View Mirror

Inner Rear View Mirror:

REPLACEMENT

HINT: The installation procedures are the removal procedures in reverse order. However, only installation procedures requiring additional information are included.

1. REMOVE MAP LAMP ASSEMBLY




2. REMOVE INNER REAR VIEW MIRROR STAY HOLDER COVER
a. Using a screwdriver, remove the holder cover.

HINT: Tape the screwdriver tip before use.




3. REMOVE INNER REAR VIEW MIRROR ASSEMBLY
a. Disconnect the mirror connector.
b. Remove the mirror by turning the stay part of the mirror counterclockwise.




4. INSTALL INNER REAR VIEW MIRROR ASSEMBLY
a. Match the claw of the stay part of the mirror with the cut part of the base.
b. Turn the stay part of the mirror clockwise so that the stay comes to the original position, and then install the mirror.
c. Connect the mirror connector.