Part 2
20. INSPECT FRONT SEAT INNER BELT ASSY RH
a. Measure the resistance of the switch.
If the result is not as specified, replace the belt assy.
21. INSPECT FRONT SEAT INNER BELT ASSY LH
a. Measure the resistance of the switch.
If the result is not as specified, replace the belt assy.
22. INSPECT CIGARETTE LIGHTER ASSY
a. Apply battery voltage to the cigarette lighter connector and check that the cigarette lighter illuminates.
If the result is not as specified, replace the lighter assy.
23. INSPECT OUTER MIRROR SWITCH ASSY
a. Apply battery voltage to the outer mirror switch connector and check that the outer mirror switch illuminates.
If the result is not as specified, replace the switch assy.
24. INSPECT PATTERN SELECT SWITCH ASSY NO.1
a. Apply battery voltage to the pattern select switch connector and check that the pattern select switch illuminates.
If the result is not as specified, replace the switch assy.
25. INSPECT RADIO RECEIVER ASSY
a. Apply battery voltage to the radio receiver connector and check that the radio receiver illuminates.
If the result is not as specified, replace the radio and player.
26. INSPECT GLOVE BOX LAMP ASSY
a. Apply battery voltage to the glove box lamp connector and check that the glove box lamp illuminates.
If the result is not as specified, replace the lamp assy.
27. INSPECT GLOVE BOX LAMP SWITCH
a. Measure the resistance of the switch.
If the result is not as specified, replace the switch.
28. INSPECT VSC OFF SWITCH
a. Apply battery voltage to the VSC off switch connector and check that the VSC off switch illuminates.
If the result is not as specified, replace the switch.
29. INSPECT A/C CONTROL ASSY
a. Apply battery voltage to the A/C control connector and check that the A/C control illuminates.
If the result is not as specified, replace the A/C control assy.
30. INSPECT SHIFT LEVER POSITION
a. Apply battery voltage to the shift level position connector and check that the shift level position illuminates.
If the result is not as specified, replace the shift lever position.
31. INSPECT AUDIO DOOR CONTROL SWITCH
a. Apply battery voltage to the audio door control switch connector and check that the audio door control switch illuminates.
If the result is not as specified, replace the switch.
32. INSPECT SEAT HEATER SWITCH
a. Apply battery voltage to the seat heater switch connector and check that the seat heater switch illuminates.
33. INSPECT MULTI-DISPLAY
a. Apply battery voltage to the multi-display connector and check that the multi-display illuminates.
If the result is not as specified, replace the multi-display.
34. INSPECT MAP LAMP ASSY
a. Apply battery voltage to the map lamp connector and check that the map lamp illuminates.
If the result is not as specified, replace the lamp assy.
35. INSPECT VANITY LAMP ASSY
a. Apply battery voltage to the vanity lamp connector and check that the vanity lamp illuminates.
If the result is not as specified, replace the lamp assy.
36. INSPECT STEP LAMP ASSY
a. Apply battery voltage to the step lamp connector and check that the step lamp illuminates.
If the result is not as specified, replace the lamp assy.
37. INSPECT KEY CYLINDER LAMP
a. Apply battery voltage to the key cylinder lamp connector and check that the key cylinder lamp illuminates.
If the result is not as specified, replace the lamp assy.
38. INSPECT SCUFF PLATE LAMP ASSY
a. Apply battery voltage to the scuff plate lamp connector and check that the scuff plate lamp illuminates.
If the result is not as specified, replace the lamp assy.