Entry Lock and Unlock Switch (For Front Side)
Entry Lock And Unlock Switch (for Front Side):
ENTRY LOCK AND UNLOCK SWITCH (for Front Side)
REMOVAL
1. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG
2. REMOVE FRONT DOOR ARMREST BASE PANEL ASSEMBLY
3. REMOVE COURTESY LIGHT ASSEMBLY
4. REMOVE DOOR ARMREST COVER
5. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY
6. REMOVE FRONT DOOR INNER GLASS WEATHERSTRIP
7. REMOVE FRONT NO. 1 SPEAKER ASSEMBLY
8. REMOVE FRONT NO. 1 DOOR TRIM BRACKET
9. REMOVE FRONT DOOR SERVICE HOLE COVER
10. REMOVE FRONT DOOR OUTSIDE HANDLE COVER
11. REMOVE FRONT DOOR OUTSIDE HANDLE SUB-ASSEMBLY
a. Remove the hole plug.
b. Using a "TORX" socket wrench (T30), loosen the screw and remove the front door outside handle cover and the door lock key cylinder as a unit.
HINT: The screw cannot be removed because it is integrated into the front door outside handle frame sub-assembly.
c. Disconnect the connector.
d. Using a "TORX" socket wrench (T30), loosen the screw.
e. Remove the front door outside handle assembly as given in the illustration.
INSTALLATION
1. INSTALL FRONT DOOR OUTSIDE HANDLE SUB-ASSEMBLY
a. Insert the front end of the front door outside handle assembly into the front door outside handle frame.
b. Insert the rear end of the front door outside handle assembly into the front door outside handle frame. Next, slide the front door outside handle assembly toward the front of the vehicle to install it.
c. Using a "TORX" socket wrench (T30), install the front door handle assembly outside with the screw.
Torque: 4.0 N.m (41 kgf.cm, 35 in.lbf)
d. Connect the connector.
2. INSTALL FRONT DOOR OUTSIDE HANDLE COVER
3. INSTALL FRONT DOOR SERVICE HOLE COVER
4. INSTALL FRONT NO. 1 DOOR TRIM BRACKET
5. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY
6. INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP
7. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY
8. INSTALL DOOR ARMREST COVER
9. INSTALL COURTESY LIGHT ASSEMBLY
10. INSTALL FRONT DOOR ARMREST BASE PANEL ASSEMBLY
11. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG