Trunk / Liftgate Spring: Service and Repair
LUGGAGE DOOR HINGE TORSION BARLuggage Door Hinge Torsion Bar:
REMOVAL
1. REMOVE LUGGAGE COMPARTMENT FLOOR MAT
2. REMOVE NO. 2 SPARE WHEEL COVER
3. REMOVE SPARE WHEEL COVER TRAY
4. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY
5. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK
6. REMOVE REAR FLOOR FINISH PLATE
7. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER LH
8. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER RH
9. REMOVE LUGGAGE DOOR HINGE TORSION BAR LH
a. Disconnect the luggage door hinge torsion bar LH from the body RH side as shown in the illustration.
b. Disconnect the luggage door hinge torsion bar LH from the luggage compartment door torsion bar support as shown in the illustration.
c. Remove the luggage door hinge torsion bar LH from the luggage door hinge and body LH side as show in the illustration.
10. REMOVE LUGGAGE DOOR HINGE TORSION BAR RH
a. Disconnect the luggage door hinge torsion bar RH from the body LH side as shown in the illustration.
b. Disconnect the luggage door hinge torsion bar RH from the luggage compartment door torsion bar support as shown in the illustration.
c. Remove the luggage door hinge torsion bar RH from the luggage door hinge and body RH side as shown in the illustration.
INSTALLATION
HINT:
- The RH side torsion bar is in front of the LH side torsion bar, thus the installation should be performed in the order of RH to LH.
- After installing the torsion bar, use your hand to open and close the luggage door. Make sure that the luggage door can be opened and closed smoothly.
1. INSTALL LUGGAGE DOOR HINGE TORSION BAR RH
a. Set the tip of the luggage door hinge torsion bar RH in the installation hole placed in the center part. Holes placed in the upper and lower parts are used for adjustment.
b. Connect the luggage door hinge torsion bar RH to the luggage door hinge and body LH side as shown in the illustration.
c. Connect the luggage door hinge torsion bar RH to the luggage compartment door torsion bar support as shown in the illustration.
d. Install the luggage door hinge torsion bar RH to the body LH side as shown in the illustration.
2. INSTALL LUGGAGE DOOR HINGE TORSION BAR LH
a. Set the tip of the luggage door hinge torsion bar LH in the installation hole placed in the center part. Holes placed in the upper and lower parts are used for adjustment.
b. Connect the luggage door hinge torsion bar LH to the luggage door hinge and body LH side as shown in the illustration.
c. Connect the luggage door hinge torsion bar LH to the luggage compartment door torsion bar support as shown in the illustration.
d. Install the luggage door hinge torsion bar LH to the body RH side as shown in the illustration.
3. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER RH
4. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER LH
5. INSTALL REAR FLOOR FINISH PLATE
6. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK
7. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY
8. INSTALL SPARE WHEEL COVER TRAY
9. INSTALL NO. 2 SPARE WHEEL COVER
10. INSTALL LUGGAGE COMPARTMENT FLOOR MAT