Removal and Replacement
REAR CONSOLE BOXRear Console Box:
Rear Console Box:
Rear Console Box:
REMOVAL
1. REMOVE INSTRUMENT PANEL FINISH PANEL END LH
2. REMOVE INSTRUMENT PANEL FINISH PANEL END RH
3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
4. REMOVE UPPER CONSOLE PANEL ASSEMBLY WITH FRONT ASH RECEPTACLE
5. REMOVE HEATER SEAT SWITCH CONSOLE BASE (w/o Seat Heater System)
6. REMOVE HEATER SEAT SWITCH CONSOLE BASE (w/ Seat Heater System)
7. REMOVE CONSOLE BOX POCKET
a. Remove the console box pocket.
8. REMOVE CONSOLE BOX CARPET
a. Remove the console box carpet.
9. REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY
a. Disengage the 6 claws and remove the console rear end panel sub-assembly.
10. REMOVE REAR CONSOLE BOX ASSEMBLY
a. Remove the 2 screws.
b. Remove the 2 bolts.
c. Remove the 2 bolts.
d. Disengage the 4 clips and remove the rear console box assembly.
e. Disconnect each connector.
INSTALLATION
1. INSTALL REAR CONSOLE BOX ASSEMBLY
a. Connect each connector.
b. Engage the 4 clips.
c. Install the 2 screws.
d. Install the 2 bolts.
e. Install the rear console box assembly with the 2 bolts.
2. INSTALL CONSOLE REAR END PANEL SUB-ASSEMBLY
a. Engage the 6 clips and install the console rear end panel sub-assembly.
3. INSTALL CONSOLE BOX CARPET
a. Install the console box carpet.
4. INSTALL CONSOLE BOX POCKET
a. Install the console box pocket.
5. INSTALL HEATER SEAT SWITCH CONSOLE BASE (w/o Seat Heater System)
6. INSTALL HEATER SEAT SWITCH CONSOLE BASE (w/ Seat Heater System)
7. INSTALL UPPER CONSOLE PANEL ASSEMBLY WITH FRONT ASH RECEPTACLE
8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
9. INSTALL INSTRUMENT PANEL FINISH PANEL END RH
10. INSTALL INSTRUMENT PANEL FINISH PANEL END LH