Entry Lock and Unlock Switch (For Rear Side)

Entry Lock And Unlock Switch (for Rear Side):

ENTRY LOCK AND UNLOCK SWITCH (for Rear Side)

REMOVAL

1. REMOVE REAR DOOR INSIDE HANDLE BEZEL PLUG
2. REMOVE REAR DOOR ARMREST BASE PANEL ASSEMBLY
3. REMOVE COURTESY LIGHT ASSEMBLY
4. REMOVE REAR DOOR ARMREST COVER
5. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY
6. REMOVE REAR DOOR INNER GLASS WEATHERSTRIP
7. REMOVE REAR DOOR SERVICE HOLE COVER
8. REMOVE REAR DOOR TRIM BRACKET
9. REMOVE REAR DOOR GLASS RUN
10. REMOVE REAR DOOR WINDOW DIVISION BAR SUB-ASSEMBLY
11. REMOVE REAR DOOR QUARTER WINDOW GLASS
12. REMOVE REAR DOOR GLASS SUB-ASSEMBLY
13. REMOVE REAR DOOR LOCK ASSEMBLY
14. REMOVE REAR DOOR OUTSIDE HANDLE COVER

15. REMOVE REAR DOOR OUTSIDE HANDLE ASSEMBLY




a. Disconnect the connector.
b. Using a "TORX" socket wrench (T30), loosen the screw.




c. Pull and hold the release plate of the outside handle frame as given in the illustration.

NOTE: The release plate may interfere with the outside handle and may be damaged when removing the handle, unless the release plate of the outside handle frame is pulled and held.




d. Remove the rear door outside handle assembly as given in the illustration.

INSTALLATION

1. INSTALL REAR DOOR OUTSIDE HANDLE ASSEMBLY




a. Insert the front end of the rear door outside handle assembly into the rear door outside handle frame.

NOTE: If the bellcrank lever is not pulled and held when installing the outside handle, the bellcrank lever will interfere with the outside handle and the release plate will be damaged.

b. Insert the rear end of the rear door outside handle assembly into the rear door outside handle frame. Next, slide the rear door outside handle assembly toward the front of the vehicle to install it.




c. Using a "TORX" socket wrench (T30), install the rear door outside handle assembly with the screw.

Torque: 4.0 N.m (41 kgf.cm, 35 in.lbf)

d. Connect the connector.

2. INSTALL REAR DOOR OUTSIDE HANDLE COVER
3. INSTALL REAR DOOR LOCK ASSEMBLY
4. INSTALL REAR DOOR GLASS RUN
5. INSTALL REAR DOOR GLASS SUB-ASSEMBLY
6. INSTALL REAR DOOR QUARTER WINDOW GLASS
7. INSTALL REAR DOOR WINDOW DIVISION BAR SUB-ASSEMBLY
8. INSTALL REAR DOOR TRIM BRACKET
9. INSTALL REAR DOOR SERVICE HOLE COVER
10. INSTALL REAR DOOR INNER GLASS WEATHERSTRIP
11. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY
12. INSTALL REAR DOOR ARMREST COVER
13. INSTALL COURTESY LIGHT ASSEMBLY
14. INSTALL REAR DOOR ARMREST BASE PANEL ASSEMBLY
15. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG