Wiper Signal Circuit
Wiper Signal CircuitDESCRIPTION
The distance control ECU detects HI mode wiper operation. If the windshield wiper operate in HI mode for 5 seconds or more, the cruise control will be cancelled and "CRUISE NOT AVAILABLE" will be displayed on the multi-information display in the combination meter. Operating the cruise main switch after HI mode wiper operation stop sill start the cruise control again.
Wiring Diagram:
Step 1:
Step 2:
INSPECTION PROCEDURE
NOTE: When the distance control ECU and/or ECM are replaced with a new one, initialization must be performed.