Skid Control ECU Communication Stop Mode
Skid Control ECU Communication Stop ModeDESCRIPTION
HINT: "ABS/VSC/TRAC" refers to the circuit that includes the skid control ECU.
Wiring Diagram:
Step 1-2:
INSPECTION PROCEDURE
NOTE:
- Turn the engine switch off before measuring the resistances of CAN bus main wire and CAN bus branch wires.
- After the engine switch is turned off, check that the key reminder warning system and light reminder warning system are not in operation.
- Before measuring the resistance, leave the vehicle as is for at least 1 minute and do not operate the engine switch, any other switches, or the doors. If any doors need to be opened in order to check connectors, open the doors and leave them open.