Air Fuel Ratio Sensor

Air Fuel Ratio Sensor:

REMOVAL

1. REMOVE AIR FUEL RATIO SENSOR




a. Disconnect the 2 air fuel ratio sensor connectors.
b. Using SST, remove the 2 air fuel ratio sensors from the front pipe assembly.

SST 09224-00010

INSTALLATION

1. INSTALL AIR FUEL RATIO SENSOR




a. Using SST, install the 2 air fuel ratio sensors to the front pipe assembly.

SST 09224-00010

Torque: 44 N.m (449 kgf.cm, 32 ft.lbf)

NOTE: The torque shown should be used for tightening without using SST. When the SST is used for tightening, the torque should be calculated based on the length of the SST.

b. Connect the 2 air fuel ratio sensor connectors.